One Stop Systems OSS-PCIE-HIB38-X4 PCIe x4 Gen3 Swtich-Based Cable Adapter - iPass Connector

MPN: OSS-PCIE-HIB38-X4
One Stop Systems OSS-PCIE-HIB38-X4 PCIe x4 Gen3 Swtich-Based Cable Adapter - iPass Connector
Out of Stock
Highlights
  • Product Type: PCIe Host Bus Adapter
  • Host Interface: PCI Express 3.0 x4
  • Condition: New
  • Category: Computers and Portables
$1,120.66
Please log in to add an item to your wishlist.
Non-cancelable and non-returnable
B2B pricing options available.

SabrePC B2B Account Services

Save instantly and shop with assurance knowing that you have a dedicated account team a phone call or email away to help answer any of your questions with a B2B account.

  • Business-Only Pricing
  • Personalized Quotes
  • Fast Delivery
  • Products and Support
Need Help? Let's talk about it.
Please log in to add an item to your wishlist.
One Stop Systems OSS-PCIE-HIB38-X4 PCIe x4 Gen3 Swtich-Based Cable Adapter - iPass Connector
MPN: OSS-PCIE-HIB38-X4

$1,120.66

Non-cancelable and non-returnable

One Stop Systems OSS-PCIE-HIB38-X4 PCIe x4 Gen3 Swtich-Based Cable Adapter - iPass Connector

Out of Stock
Highlights
  • Product Type: PCIe Host Bus Adapter
  • Host Interface: PCI Express 3.0 x4
  • Condition: New
  • Category: Computers and Portables

PCIe cable adapters install easily into a computer's PCIe slot. A PCIe cable can then be plugged into the adapter to extend the PCIe bus from the motherboard to an external device, like an expansion enclosure or storage device. The PCIe x4 adapter has an 12-lane switch with built-in DMA controller and extends the PCIe bus at 32Gb/s with extremely low latency because there is no conversion software.

The host adapter installs in the host computer's PCIe x4 I/O slot, allowing communication between the processor and multiple I/O points

Insert the host cable adapter into a PCIe x4 in the host system slot. Make sure that the card is well seated and tighten the screw on the face plate. Attach the cable by inserting the cable into the slot and pushing on the metal tab to raise the metal pins. Release the metal tab ones the pins are aligned with the pin holes.