|
Specifications |
|
CPU |
Supports up to two Intel® 64-bit Xeon® processor(s)
|
|
GPU |
4x NVIDIA Fermi M2070 GPUs
|
| Chipset |
Dual Intel® 5520 (Tylersburg) chipset + PLX 8647 + ICH10R |
| Form Factor |
2U Rackmount |
| System
Bus Frequency |
Intel
QuickPath Interconnect (QPI)
up to 6.4GT/s |
| Memory
Type |
1333 / 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| Memory
Capacity |
- 6x 240-pin DIMM sockets
- Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Memory Mirroring supported
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| Drive
Bays |
10x 2.5" Hot-swap SATA drive bays (4 spares) |
| Graphics |
Matrox G200eW 16MB DDR2 |
| Network Controller |
Intel® 82576 Dual-Port GbE Controller |
| Input/Output |
- 6 Serial ATA ports
- 6 SATA hard drives supported
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated IPMI LAN port
- 2 rear USB 2.0 ports
- 1 Serial header
- 1 VGA Connector
|
| Expansion
Slots |
- 1 PCI-E 2.0 (x8), full-height full-length
- 2 PCI-E 1.0 (x4), full-height full-length
- 1 PCI-E 2.0 (x8), low-profile
|
| Power
Supply |
1800W (1+1) Redundant 1800W power supply with PMBus |
| AC Input |
100-240 V, 50-60 Hz, 12-8.5 Amp |
| DC Output |
- 4 Amp @ +5V standby
- 150 Amp @ +12V
|
| Fan |
5x 8cm heavy-duty fans with optimal fan speed control
|
| Temperature |
Operating:
10 - 35°C
Storage: -40 - 70°C |