Product DetailsThe VisionRGB-E1S has a single video capture device supporting up to 1920x1080 DVI or 2048x1536 Analog resolution.
The VisionRGB-E1S captures the Analog/ DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.
KEY QUALITIES OF THE VisionRGB-E1S CAPTURE CARDS:
Single channel RGB/DVI/HD video capture card
Four Lane PCI Express interface with a maximum data rate of 650MB/sec
Maximum analog RGB video capture resolution of 2048 x 1536 x 24bit
Maximum DVI capture resolution of 1920 x 1200 x 24bit
HD modes using the supplied DVI/ Component Adapter or DVI/HDMI Adapter (HDCP not supported)
On card processor for real time mode and sync detection
Support for multiple capture cards allowing up to 32 capture channels. (32 cards)
Direct DMA driver software and streaming driver
High quality down scaling
Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8 video formats
High performance DMA to system memory or direct to graphics memory with scatter gather
Support for separate H/V sync, Composite sync or Sync on Green 16 cropping windows per capture channel
Includes WDM streaming drivers and the Datapath Vision application software
Fully integrated with the Datapath Wall Control-red software for video wall applications
VisionRGB-E1S is also optimised for operation with the Datapath range of graphics cards
Support for Windows? XP/ Vista/ Server 2003/Server 2008/ Windows? 7/ Windows? 8
Datapath SDK included for software developers
- Technical Specs
Learn more about Datapath VisionRGB-E1 1 Channel RGB/DVI Capture Card
Specifications Brand Datapath Part Number VisionRGB-E1 Board format PCI Express x4 low profile card, 68.9mm x 167.6mm
PCI Express bus master with scatter gather DMA providing
Maximum data rate of 650MB/s
Connectors One DVI-I type connector Video capture memory 32MB, triple buffered HD modes 1080p, 1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector (HDCP not supported) Input mode detection Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal Update Rate User defined, captured frame rate will match the source. Providing max data rate (650MB/s) is not exceededMulti-buffered to eliminate tearing artifacts Video format options Analog RGB plus HSync and VSync (5 wire)
Analog RGB with Composite Sync (4 wire)
Analog RGB with Sync on Green/ YPbPr (3 wire)
DVI Single Link
Operating system support Windows? XP, Windows? Vista, Windows? Server 2003, Windows? Server 2008, Windows? 7, W indows? 8 and Linux Warranty 3 Years
- Return Policy
Limited Replacement Return Policy - Return for refund within: non-refundable
- Return for replacement within: 30 days (no return shipping provided)
Products eligible for replacement must be returned to SabrePC within 30 days of the invoice date for this policy to apply. Products covered by this return policy may only be returned for a replacement of the same or equivalent item, if the original is no longer available. “Return” constitutes receipt of the product by SabrePC, and not the mere issuance of an RMA. Limited Non-Cancelable, Non-Refundable (NCNR) Replacement Return Policy - Return for refund within: non-cancelable, non-refundable (NCNR)
- Return for replacement within: 10 days (only for DOA products/no return shipping provided)
Products covered by this return policy are non-cancelable and non-refundable. SabrePC has no obligation to accept return of any product covered by this return policy for whatever reason, with the sole exception of when the product is found to be damaged or defective at time of receipt, as long as SabrePC is notified within 10 days of receipt of any such product.
Damaged or defective products must be returned to SabrePC within 10 days of the invoice date for this policy to apply. Products covered by this return policy may only be returned for a replacement of the same or equivalent item. “Return” constitutes receipt of the product by SabrePC, and not the mere issuance of an RMA.
Products that state “This item can be returned to the product manufacturer only” may be returned directly to the product manufacturer for repair or replacement (if eligible within manufacturer’s warranty), unless otherwise required by law. Please refer to manufacturer’s warranty section for further details.
- Customer Review
Be the first to review this product
Value 0.0 Features 0.0 Quality 0.0 Performance 0.0